Télécharger Imprimer la page

ProCharger 1.000 LITHIUM Mode D'emploi page 44

Publicité

case, the battery is evaluated by the charger as "faulty". The test or
charging process is interrupted and the "Faulty" LED
If the battery passes the test, the "Ready" LED
battery is charged and can be disconnected from the charger. If the
battery is not disconnected from the charger, the device changes
to trickle mode and the battery is recharged once a day (within 24
hours).
10 | Preparation, connection and operation
Connecting batteries incorrectly, short-circuiting
batteries and improper handling of the battery
and charger are potential sources of danger.
• Make sure that all preparations are made
• Every time you use your charger, first check
• If the battery contacts are difficult to access
44
0020145_ProCharger_Lithium_ANL_18.indd 44
WARNING!
properly.
that its cables are not damaged. Never start
using the device if the protective insulation on
the power cord or charging cable is damaged
(crushed, torn, sheared off etc.).
Do not position it directly on or in the direct
vicinity of the battery.
or the terminals of the charger could come
into contact with adjacent components, the
battery will need to be removed. Adhere to the
manufacturer specifications on removal of the
battery.
lights up.
lights up. The
20.07.18 12:01

Publicité

loading

Ce manuel est également adapté pour:

10020145