Publicité
6 | Meanings of the LED displays
9. "Reverse polarity"
8. "Faulty"
7. "Error"
6. "Pre-charge"
6.1 | Functional indications
40
0020145_ProCharger_Lithium_ANL_18.indd 40
LED (red)
LED (red)
LED (red)
LED (blue)
1. "Mains" LED: The charger is connected to the mains
power and ready for operation.
2. "Charging" LED: The connected battery is being charged.
3. "Test" LED: The battery voltage is being checked.
4. "Battery fully charged" LED: The battery is fully charged
and can be disconnected from the charger.
5. "Battery fully charged" LED and "Charging" LED light
up simultaneously: Trickle mode: the battery is regularly
+
recharged. A check is performed every 24 hours to
determine whether recharging is required.
6. "Pre-charging" LED: A deeply discharged battery has
been detected and is being gently pre-charged at 4 V.
1. "Mains"
LED (white)
2. "Charging"
LED (yellow)
3. "Test"
LED (yellow)
4. "Battery fully
charged"
LED (green)
20.07.18 12:01
Publicité
