Publicité
LITHIUM CHARGER
1 | Product description
The ProCharger 1.000 Lithium is an advanced and intelligent
diagnostic battery charger and testing device for lithium-ion
motorcycle batteries. State-of-the-art characteristic-controlled
charging technology, in conjunction with an intelligent software
controller, ensures optimum charging and care of your battery at
all times. 8 LED displays permanently inform you of the current
operating status. The ProCharger 1.000 Lithium is safeguarded
against overloading, polarity reversal and short-circuiting and is also
spark-free during connection. The device ensures efficient and safe
charging of your lithium battery.
These instructions relate exclusively to the ProCharger 1.000
Lithium charger. They contain important notes on safety and
handling. Read the instructions for use carefully, especially the
safety instructions, before using the ProCharger 1.000 Lithium
charger. Failure to adhere to these instructions for use can lead to
serious injury or material damage. Keep the instructions for use for
future reference. If you pass the ProCharger 1.000 Lithium charger
on to third parties, you must hand over these instructions for use.
The instructions for use are based on the standards and
regulations valid in the European Union. If abroad, observe country-
specific guidelines and laws.
2 | Quick-start guide
Beforehand, read the safety instructions and the points preparation,
connection and operation.
1. Connect one of the charging cables (with charging clamps or ring
2. Connect the charging clamps or ring connectors to the battery,
30
0020145_ProCharger_Lithium_ANL_18.indd 30
connectors) to the charger using a quick connector.
ensuring the correct polarity. Connect the red cable to the
20.07.18 12:01
Publicité
