Publicité
2 - INTRODUCING THE PRODUCT
2.1 - Description of the product
DUO24 is a gear motor designed and built for use on swing leaf gates.
Paragraph 2.2 contains the weight and length limits of the leaf. Any
2.2 - Technical specifications
CODE
DUO24
TECHNICAL DATA
MODELS
Gear motor speed with no load
Maximum torque
Nominal supply voltage
Nominal current
Rated power
Working cycle
Opening time at 90°
Working stroke
Control unit
Maximum leaf length
Leaves max weight
Thermoprotection
Integrated lights
Degree of protection
Dimensions (L-P-H)
Weight
Operating temperature
Sound emission level
* with optimized fixing dimensions
2.3 - Description of the control unit
The CE24BNC control unit is the most modern and efficient control
device for two 24VDC Motorisation Plus gear motors for swing
leaf gates; any other use is considered improper and is therefore
forbidden. The CE24BNC control unit can also be configured to
operate with a single 24VDC motor.
2.4 - Description of control unit connectors
1. Motor 1 (M1)
2. Motor 2 (M2)
3. M1 and M2 encoder input
4. 24VAC power supply for safety devices and accessories
5. 24VDC power supply (unregulated) for safety devices
(radio safety edge, photocells)
6. Connections for flashing light, electric lock/open gate indicator
light, courtesy light
7. Inputs for safety devices (safety edge/STOP, photocells)
8. Inputs of OPEN, CLOSE, PAR, SBS commands
9. Status LED indicators: STOP/EDGE, PH2, PH1 safety devices
(red); OPEN, CLOSE, PAR, SBS controls (green)
10. Unit power supply (secondary transformer 24VAC + PE)
DESCRIPTION
GEAR MOTOR WITH SWING LEAVES UP TO 3M IN LENGTH AND UP TO 500KG IN WEIGHT;
24VDC POWER SUPPLY
cm/s
Nm
VDC
A
W
%
sec
mm
m
kg
IP
mm
kg
°C
dB(A)
other use is considered improper and is therefore forbidden.
DUO24
2,6
1500
24
3,5
85
80
18-25*
415
CE24BNC
3
500
-
-
IP44
844-100-104
6
-20+55
≤ 70
The 5-digit/14-segment display of the CE24BNC control unit
makes acronyms easy to read, thus making programming and
automation monitoring easier; the structure of the menus allows
for the operating times and modes to be set easily.
11. Back-up battery KBP/KBPN (optional)
12. SBK, set-up for connection to energy-saving module
13. 2.0AT fuse (timed)
14. Disabling of EDGE/STOP, PH1, PH2 safety devices
15. 5-digit/14-segment display
16. LED indicator (green) for the radio functions or
error messages
17. Antenna
18.
(UP) button
19. Button
20.
(DOWN) button
21.
(SBS) button
22. Connector for optional interfaces (Kube, PowerBus)
EN
29
Publicité
