Publicité
EN
connect all devices to an electric power line
equipped with an earthing system;
the product cannot be considered to provide ef-
fective protection against intrusion.
If effective protection is required, the automation
system must be combined with other devices;
the product may not be used until the automation
system "commissioning" procedure has been
performed as specified in the "Automation sy-
stem testing and commissioning" section;
the system power supply line must include a cir-
cuit breaker device with a contact gap allowing
complete disconnection in the conditions speci-
fied by class III overvoltage;
use unions with IP55 or higher protection when
connecting hoses, pipes or cable glands;
the electrical system upstream of the automation
system must comply with the relevant regulations
and be constructed to good workmanship stan-
dards;
this appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use
of the appliance in a safe way and understand
the hazards involved;
before starting the automation system, ensure
that there is no-one in the immediate vicinity;
before proceeding with any cleaning or mainte-
nance work on the automation system, discon-
nect it from the electrical mains;
special care must be taken to avoid crushing
between the part operated by the automation sy-
stem and any fixed parts around it;
children must be supervised to ensure that they
do not play with the equipment.
WARNING !
Frequently examine the installation for imba-
lance where applicable and signs of wear or
damage to cables, springs and mounting.
Do not use if repair or adjustment is neces-
sary.
28
WARNING !
Since the automation system exceeds 10 kg
in weight, it must be handled using a truck
(IEC 60335-2-103:2015)
WARNING !
Packaging components (cardboard,
plastic, etc.), duly separated, must be
placed in the appropriate bins. Device
components such as electronic boards,
metal parts, batteries, etc. must be sepa-
rated and differentiated.
For the methods of disposal, the rules in for-
ce in the place of installation must be applied.
DO NOT DISPOSE IN THE ENVIRONMENT!
LABEL HABITAT SAS reserves the right to
amend these instructions if necessary; they
and/or any more recent versions are available
at
www.motorisationplus.com
Publicité
