Parkside PWSA 12 B1 Traduction Des Instructions D'origine page 39

to avoid slipping which could
cause your hands to come into
contact with the grinding disc.
• The workpiece gets hot dur-
ing grinding. Do not touch the
machined area, allow it to cool
down. There is a risk of burn-
ing. Do not use coolants or the
like.
• If you are tired or have con-
sumed alcohol or tablets, do not
work with the device. Always
have a break on
• Turn off the device and remove
the battery from the device be-
fore servicing the device.
• Do not use any accessories that
are not recommended by PARK-
SIDE. This can result in electric
shock or fire.
RESIDUAL RISKS
Even if properly operating and
handling this electric tool, some
residual risks will remain. Due to its
construction and build, this electric
tool may present the following haz-
ards:
a) Lung damage if suitable respira-
tory protection is not worn.
b) Hearing damage if suitable ear
protection is not worn.
c) Damage to health due to
- touching the area of the grind-
ing tool which is not covered;
- ejection of parts of workpieces
or damaged grinding discs.
time..
d) Health injuries which result from
swinging hand and arm, in the
event that the device is used
over a longer period of time
or is not used and maintained
properly.
Warning! During opera-
tion, this electric tool gener-
ates an electromagnetic field
which, under certain circum-
stances, may impair the func-
tionality of active or passive
medical implants. To reduce
the risk of serious or lethal
injuries, we recommend
that persons with medical
implants consult their doctor
and the manufacturer of their
medical implant before oper-
ating the machine.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and char-
ger from the Parkside
X 12 V Team series. A
detailed description of
the charging process
and further informati-
on can be found in the
separate operating inst-
ructions.
GB IE
39