Parkside PWSA 12 B1 Traduction Des Instructions D'origine page 33

power tool before making
any adjust -ments, chang-
ing accessories, or storing
power tools. Such preventive
safety measures reduce the risk
of starting the power tool acci-
dentaIly.
• Store idle power tools out
of the reach of children
and do not allow persons
unfamiliar with the power
tool or these instructions
to operate the power tool.
Power tools are dangerous in
the hands of untrained users.
• Maintain power tools.
Check for misalignment
or binding of moving
parts, breakage of parts
and any other condition
that may affect the power
tool's operation. If dam-
aged, have the power tool
repaired before use. Many
accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp
and clean. Properly main-
tained cutting tools with sharp
cutting edges are less Iikely to
bind and are easier to control.
• Use the power tool, ac-
cessories and tool bits etc.
in accordance with these
instructions, taking into
account the working con-
ditions and the work to be
performed. Use of the power
tool for operations different from
those intended could result in a
hazardous situation.
Service:
• Have your power tool ser-
viced by a qualified repair
person using only identi-
cal replacement parts. This
will ensure that the safety of the
power tool is maintained.
Safety instructions for all
applications
Common safety instructions
for grinding and cutting:
• This electric tool is to be
used as a grinder and cut-
ting grinder. Follow all
safety instructions, direc-
tives, illustrations and
facts which you receive
with the device. If you do
not follow these instructions, an
electrical shock, fire and/or se-
rious injury may occur.
• This electric tool is not
suitable for sanding, wire
brushing and polishing.
Using the electric tool in ways
for which it is not intended may
cause hazards and injuries.
GB IE
33