Parkside PWSA 12 B1 Traduction Des Instructions D'origine page 32

GB IE
operating a power tool.
Do not use a power tool
while you are tired or un-
der the influence of drugs,
alcohol or medication. A
moment of inattention white op-
erating power tools may result
in serious personal injury.
• Use personal protective
equipment. Always wear
eye protection. Protective
equipment such as dust mask,
non-skid safety shoes, hard hat,
or hearing protection used for
appropriate conditions will re-
duce personal injuries.
• Prevent unintentional
starting. Ensure the switch
is in the off-position be-
fore connecting to power
source and/or battery
pack, picking up or carry-
ing the tool. Carrying power
tools with your finger on the
switch or energising power tools
that have the switch on invites
accidents.
• Remove any adjusting key
or wrench before turn-
ing the power tool on. A
wrench or a key left attached to
a rotating part of the power tool
may result in personal injury.
• Do not overreach. Keep
proper footing and bal-
ance at all times. This ena-
32
bles better control of the power
tool in unexpected situations.
• Dress properly. Do not
wear loose clothing or
jewellery. Keep your hair,
clothing and gloves away
from moving parts. Loose
clothes, jewellery or long hair
can be caught in moving parts.
• If devices are provided
for the connection of dust
extraction and collection
facilities, ensure these are
connected and properly
used. Use of dust collection
can reduce dust-related haz-
ards.
Power tool use and care:
• Do not force the power
tool. Use the correct pow-
er tool for your applica-
tion. The correct power tool
will do the job better and safer
at the rate for which it was de-
signed.
• Do not use the power tool
if the switch does not turn
it on and off. Any power tool
that cannot be controlled with
the switch is dangerous and
must be repaired.
• Disconnect the plug from
the power source and/or
the battery pack from the