Parkside PWSA 12 B1 Traduction Des Instructions D'origine page 34

GB IE
• Do not use any accessories
that are not specifically in-
tended and recommended
for this electric tool by the
manufacturer. Simply be-
cause an accessory can be at-
tached to your electric tool does
not guarantee safe operation.
• The allowable rotation
speed of the attachment
tools must be at least as
high as the highest rota-
tion speed indicated on
the electric tool. Accessories
that run faster than the allow-
able speed can break and fly
apart.
• The outside diameter and
thickness of the attach-
ment tool must correspond
to the dimensions indi-
cated for your electric tool.
Attachment tools which are
wrongly dimensioned cannot
be sufficiently shielded or con-
trolled.
• Attachment tools with
threaded attachment
must fit the threading
of the grinding spindle
exactly. For attachment
tools which are mounted
through a flange, the di-
ameter of the hole in the
attachment tool must fit
the mounting diameter of
34
the flange. Attachment tools
which cannot be precisely at-
tached to the electric tool turn
unevenly, vibrate very strongly
and can ultimately lead to a loss
of control.
• Never use damaged at-
tachment tools. Check
attachment tools such as
grinding discs for chip-
ping or cracks, grinding
plates for cracks, wear
or strong abrasion before
using them. If the electric
tool or the attachment tool
falls off, check whether
it is damaged or use an
undamaged attachment
tool. If you have checked
the attachment tool and
attached it, keep yourself
and any nearby persons
beyond the level of the ro-
tating attachment tool and
allow the device to run for
1 minute at the highest
rotational speed. Damaged
tools usually break during this
test period.
• Wear personal safety
equipment. Depending on
the application, use full
face shields, eye protec-
tion or safety goggles. In
so far as it is appropriate,
wear dust masks, ear pro-