Publicité
ENGLISH
CONVERTING THE REGULATOR
"For colored copy please refer to IKEA website."
Warning: To avoid risk of electrical shock and fire, unplug the range and be sure the gas supply is turned off before beginning
the conversion process.
1. Go to the back of the range towards the bottom of the unit. Remove the six Philip head screw shown below in FIG A.
2. You now have access to the regulator as shown in FIG B. Remove the plastic red cap to expose the brass pressure
adujstmant cap beneath it. This cap comes from the factory in the Natural gas position, see FIG D. To convert this range to
LP use an adjustable wrench to unscrew the brass cap and flip it to the LP position. See FIG E.
FIG B
FIG C
3. Using an adjustable wrench, remove the brass cap from the regulator. Fig D shows the cap removed. Remove the plastic cap
and flip the brass cap over 180° so it has the pin faces downwards (As shown in FIG E).
FIG D
FIG E
9
Publicité
