Publicité
9276635
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions. Place lights so you are not working in a shadow.
2.
Keep anyone not wearing the appropriate safety equipment away from the
work area.
3.
Store tools properly in a safe and dry location. Keep tools out of the reach
of children.
4.
Do not install or use in the presence of flammable gases, dust or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear the appropriate type of full-face shield in addition to safety googles,
as the work can create chips, abrasive or particulate matter.
3.
Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
a.
Do not wear gloves when operating a tool that can snag the material
and pull the hand into the tool.
4.
Wear protective clothing designed for the work environment and tool.
5.
Non-skid footwear is recommended to maintain footing and balance in the
work environment.
6.
Wear steel toe footwear or steel toe caps to prevent a foot injury from
falling objects.
7.
Wear the appropriate rated dust mask or respirator.
8.
This tool can cause hearing damage. Wear hearing protection gear with an
appropriate Noise Reduction Rating to withstand the decibel levels.
9.
Use push sticks and push blocks to move the material on the jointer.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to the tool.
4
Benchtop Jointer
For technical questions call 1-800-665-8685
V1.0
Publicité
