Publicité
Center of the
Dartboard (Bull's Eye)
Throwing line
237cm
TOOLS REQUIRED FOR ASSEMBLY:
Screwdriver and drill - (not included)
1.
Preparing the darts: Screw the point (tip) and shaft into the grip
(barrel). If extra flights, bend the flight into shape and put it into the
shaft.
2.
Suspend the dartboard by means of the two mounting holes in the
back. 2 screws are provided for mounting on the wall. Should the
screws not be suitable for your wall, change them for suitable screws.
There needs to be a power socket nearby. According to international
dart match rules, the dartboard should be suspended in such a way
that the height from the floor to the center of the dart circle is 1.73 m
(68") and the distance from the throwing line to the board is 2.37 (7
feet 91/4 inches).
3.
Place two marks side-by-side of the selected wall studs 192cm (75
5/8") above the floor, with 14cm (5 1/2") between them. Screw two
screws into the reference marks until the screw heads are protruding
about 13mm (1/2") from the wall.
4.
Line up the mounting holes on the back of the game with the screw
heads, then mount the game. It may be necessary to adjust the
screws until the board fits snugly against the wall.
5.
Connect the adapter to the wall outlet and
the plug to the dartboard. The adapter must
have 230V, AC – 5V DC, 1000mA.
6.
Familiarize yourself with the function of your dartboard before use.
Should you suspect the dartboard does not work correctly, please
refer to the TROUBLE SHOOTING section in this manual first.
MOUNTING INSTRUCTIONS
Wall
TIPS AND GUIDANCE
Publicité
