Publicité
There is low or no suction
26
The breast pump
is not responding
as expected
The breast pump
exterior got wet
The breast pump
has been submerged
in water
Data cannot be sent
If you have not resolved the problem with your breast pump or you have further questions,
please contact Medela Customer Service. For contact data visit www.medela.com.
Under "Contact" choose your country.
15400140_A_0523-Freestyle-Hands-free-MD-IFU-EN-FR-ES_052323.indb 26
15400140_A_0523-Freestyle-Hands-free-MD-IFU-EN-FR-ES_052323.indb 26
• Make sure that all collection cups components
are clean and dry and that connections are secure.
• While pumping, make sure the breast shields
form a complete seal around the breast.
• When single pumping, make sure that the unused
tubing end is correctly plugged into the tubing holder.
• If suction does not improve after having followed
these steps, contact Medela Customer Service.
• To reset your breast pump, press and hold the On/Off button
(on the side) for seven seconds.
• If there is no change, contact the Medela Customer Service.
• Unplug the breast pump from the power source
and switch it off.
• Dry off the exterior of the breast pump.
• Unplug the breast pump from the power source
and switch it off.
• Contact Medela Customer Service.
• The Bluetooth function
Turn the Bluetooth function on and try to send the data again.
• Pairing between the two devices has not been completed.
Perform pairing instructions again. Refer to chapter 8.4.
• The mobile device is too far away from the breast pump.
Move the device and breast pump closer together.
• The application on the mobile device is not ready.
Check the application.
on the mobile device is turned off.
2023. 05. 23. 14:44
2023. 05. 23. 14:44
Publicité
