Publicité
6.2 Washing
Refer to figure ¢4 on the foldout pages.
Rinse and wash by hand
(before first use and after each use)
Do not place the parts directly in a kitchen
sink for rinsing and washing. Use a
dedicated wash basin for infant items.
1. Rinse the disassembled parts,
except for the tubing, with cold
clear drinking-quality water
(approx. 68 °F/20 °C).
2. Clean the parts with plenty of warm,
soapy water (approx. 86 °F/30 °C).
Use a commercially available dish
soap and a clean soft brush.
3. Rinse the parts with cold clear
drinking-quality water for 10 to 15
seconds (approx. 68 °F/20 °C).
4. Allow to completely dry after washing.
Drying
4. Dry
1. Allow to air-dry on a clean, unused dish towel or single-use paper towel.
Air-dry
Allow to air-dry on a clean, unused dish
towel or paper towel. Store the dry parts
in a clean environment.
Do not store parts in an airtight
container/bag if moist. It is important that
all residual moisture dries.
15400140_A_0523-Freestyle-Hands-free-MD-IFU-EN-FR-ES_052323.indb 13
15400140_A_0523-Freestyle-Hands-free-MD-IFU-EN-FR-ES_052323.indb 13
Wash in dishwasher
(maximum once per day)
or
5. Place the disassembled parts, except
for the tubing, on the top rack or in the
cutlery section. Use a commercially
available dishwashing detergent.
6. Rinse the yellow membrane under
running water after dishwashing.
7. Allow to completely dry after washing.
i
Information
If using a dishwasher, parts may
become discolored. This will not impact
the functioning of the parts.
13
7
2023. 05. 23. 14:44
2023. 05. 23. 14:44
Publicité
