Publicité
16.3
Storage
• Disconnect the power plug
• Store unused machines in a dry, locked place out of the reach of children.
To extend the service lifespan of the machine and ensure smooth operation, carry out the following
before storing it for a longer period of time:
• Clean the machine thoroughly.
• Treat all moving parts with an environmentally friendly oil.
Never use grease! Do not oil the engine!
ZIPPER MASCHINEN GmbH
ZI-WP500TN
www.Zipper-Maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
3.
Slowly descend the log carriage (6) towards the
ground (see Fig. L).
4. Loosen the fixing screw (7) to release the ring end of
the chain of the locking pin (8) (see Fig. M, Pic. 1).
5. Pull the locking pin (8) out of the base frame (see Fig.
M, Pic. 2).
6. Insert the locking pin (8) into the bore hole (9) on the
outside of the saw blade cover to prevent the saw
blade from rotating (see Fig. M, Pic. 3).
7.
Loosen the M12×30 screw (10) with a saw blade wrench.
Remove the M12×30 screw (10), the washer (11) and the
flange (12). Detach the old saw blade (13) (see Fig. N).
8. The assembly of the new saw blade is done in reverse
order.
CAUTION
Make sure that the saw blade is inserted
in the correct position. The arrow on the
saw blade must point in the direction of
the operating side!
29
Publicité
