Sony UP-55MD Mode D'emploi page 39

The cursor moves back by one and the
character entered in step 5 is highlighted in
green.
2 Select DEL by pressing the F, f, G or g button.
Highlight DEL in green by pressing the
Lit in green
F, f, G or g button. DEL blinks in green.
ress the EXEC button.
3
P
The character selected in 1 is deleted.
When the character to be deleted is located
among previously entered characters, the
characters after the deleted one shift back by
one.
7
Repeat steps 4, 5 and 6 to enter the remaining
characters of the caption.
To enter a space
1 Position the green cursor at the point where you
want to enter a space.
2 Select SP by pressing the F, f, G or g button.
3 Press the EXEC button.
A single space is entered and the green cursor
moves to the next position.
If there is a character at the position where the
space is entered, that character is deleted and a
single space is left.
To replace a previously entered character
without changing the number of characters
You can replace a previously entered character with
a new one.
1 Position the green cursor at the character to be
replaced by performing the operations
explained in step 4.
2 Overwrite the invalid character with the correct
character by performing the operations
explained in steps 5 and 6.
The previously entered character is replaced
with the new one.
To add characters midway
1 Position the cursor at the position where a
character is to be added by performing the
operations explained in step 4.
2 Select INS by pressing the F, f, G or g button.
Then press the EXEC button.
A single space is inserted between characters
and the cursor is positioned at the space.
3 Enter the character to be added.
When it is necessary to change the CAPTION
ON/OFF setting, go to step 8. If not, go to step
9.
Example: Add a character between A and
B.
1 Move the cursor to B. (B is highlighted in green.)
2 Highlight INS. (INS blinks in green).
Then, press the EXEC button.
A single space is inserted between A and B and
the green cursor is positioned at the space.
Cursor (lit in green)
8
Set the CAPTION ON/OFF function to ON.
Making Printouts With Date or a Caption
39