Sony UP-55MD Mode D'emploi page 25

2
Select desired user set number by pressing the
LOAD USER button, or G or g button.
Each time you press the LOAD USER button, the
user set number changes.
The selected user set number will disappear within
about three seconds.
User name of the user
set number selected
3
Press the EXEC button.
The printer functions according to the settings
selected in step 2.
4
Press the CAPTURE button at the instant the image
you want to print appears on the screen.
The image is captured into memory according to
the user set selected in step 3.
5
Press the PRINT button.
The printer makes printouts according to the user
set selected in step 3.
To select the desired user set number by using
the menu
1 1, 3
1, 2
Highlight the desired
user set number in
green.
6
5
4
1
Press the MENU button, and display the PRINTER
SETUP menu by pressing the F, f, G or g button.
Highlight PRN in green by pressing the F, f, G or g
button, then the PRINTER SETUP menu appears.
2
Select LOAD USER by pressing the F or f button.
Highlight LOAD USER in green by pressing the F
or f button. The currently selected load user
number is lit in green.
3
Select the desired user number by pressing the G or
g button.
The user name of the selected user set number
appears.
Highlight the desired user number in green by
pressing the G or g button. The user name of the
selected user number appears below.
User name of the user
set number selected
4
Press the EXEC button.
The printer functions according to the settings
selected in step 3.
Making Full-Size Image Printouts
25