Making Multiple Copies Of Identical Printouts - Sony UP-55MD Mode D'emploi

5
Press the CAPTURE button at the instant the image
you want to print appears on the screen.
The image is captured into memory according to
the user set selected in step 3.
6
Press the PRINT button.
The printer makes printouts according to the user
set selected in step 3.
Making Multiple Copies of Identical
Printouts
You can make up to 10 copies of identical printouts.
Setting the printout quantity
The following two methods are available to set the
number of printouts.
• Using the PRINT QTY button
However, you cannot use this button to decrease the
number of printouts.
• Using the menu
You can change the designated number of copies before
printing or any time during printing.
Note
When you change the designated number of copies
during printing, only the number of copies of printouts
which are being currently printed is changed. When
printing is completed, the number of copies is reset to
the one set before staring printing.
To set the printout quantity by using the PRINT
QTY button
1
1
Press the PRINT QTY button.
The following screen appears.
If you do not perform any operation after you press
the PRINT QTY button, the currently set number of
26
Making Full-Size Image Printouts
1, 2
copies appears for a few seconds, after which it
disappears.
Currently selected number of copies
2
Press the PRINT QTY button until the desired
number appears, while the screen shown in step 1 is
displayed.
Repeatedly pressing the PRINT QTY button
increases the number up to a maximum of 10. When
the number reaches 10, if the button is pressed
again, it goes back to 1. Or repeatedly pressing the
g button also increases the number up to a
maximum of 10. When the number reaches 10, if
the g button is pressed again, it goes back to 1.
Press the PRINT QTY button or g button until the
desired number appears.
To decrease the number of copies
While the screen which appears in step 1 is displayed,
press the G button. Each time you press the G button, the
number decreases. When the number reaches 1, if the G
button is pressed again, it goes up to 10.
Setting the printout quantity using the menu
1
Display the PRINTER SETUP menu according to
the operations of step 1 described in "To select the
desired user set number by using the menu" on page
25.