Sony UP-55MD Mode D'emploi page 51

To change the setting values:
Press the G or g button to decrease or increase the
setting values.
The current setting value
The current setting value
The setting value increases every time you press g
button.
The setting value decreases every time you press the G
button.
To reset the values to factory setting:
Position the cursor at the item to be reset to
defaults, then press the G and g buttons
simultaneously.
When there are sub menus:
When there are sub menus, PRESS [>] is displayed
on the selection part of the menu. Select the desired
sub menu by pressing the F or f button, then press
the g button.
Example: On the PRINTER SETUP menu
To display the SYSTEM SETUP sub menu:
Select SYSTEM by pressing the F or f button, then
press the g button.
The SYSTEM SETUP menu appears.
Highlight SYSTEM in green by pressing the F or f
button, then press the g button.
Press the F or f button until SYSTEM appears, then
press the g button.
To return from the sub menu:
Select the menu on the top line, then press the g
button.
Highlight PRN SETUP in green by pressing the F
button, then press the g button.
Press the F button until PRN SETUP appears, then
press the g button.
51
Basic Menu Operations