Sony UP-55MD Mode D'emploi page 38

Example: Move the cursor to the left by two.
1 Highlight the G
button in green.
The blinking cursor moves
to this position.
5
Select the character you want to enter by pressing
the F, f, G or g button.
Example: Enter S.
Highlight S in green by pressing the F, f, G or g
button. S blinks in green.
When you enter characters on the printer
window display:
It is recommended that you display the characters to
be entered on the printer window display by
pressing either G or g button.
When the cursor is positioned at the right
end:
The cursor moves to the left end on the next line
when you press the g button.
38
Making Printouts With Date or a Caption
The cursor is currently
positioned here (lit in green).
2 Press the EXEC
button twice.
For example, when the cursor is positioned at N,
pressing the g button results in the cursor moving
to O at the left end on the next line.
When the cursor is positioned at EXIT:
Only the G and g buttons are effective. If you press
the g button, the cursor moves to the top on the first
line, that is A.
To select either capital letters or small
letters
You can change the characters in the character entry
area from capital letters to small letters or vice
versa.
1 Highlight SHIFT in green by pressing the F, f,
G or g button on the video monitor. Or display
SHIFT or shift on the printer window display.
When characters are displayed in capital letters
in the character entry area, shift is displayed in
the printer window display. When displayed in
small letters, SHIFT is displayed.
2 Press the EXEC button.
Capital letters are changed to small letters, or
small letters are changed to capital letters in the
character entry area.
Note
Characters already entered (displayed in the
character display area) are not changed even if
letters are changed in the character entry area.
6
Press the EXEC button.
The character selected in step 5 appears at the point
where the green cursor is positioned in the character
display area, after which the cursor moves to the
next position.
The cursor moves to this position.
When you enter the wrong character in the
above example
by pressing the F, f, G or g button,
1 Select
then press the EXEC button.