Publicité
12
SAFETY
This section contains information and important notes on safe commissioning and handling of the
machine.
For your personal safety, please read these operating instructions carefully before
commissioning. This will enable you to handle the machine safely and prevent misun-
derstandings as well as personal injury and damage to property. Also observe the
symbols and pictograms used on the machine as well as the safety and danger infor-
mation!
12.1
Intended Use of the Machine
The machine is intended exclusively for the following activities:
Longitudinal cross-cutting of wood and materials with similar physical properties to wood, out-
doors or in sufficiently ventilated rooms or/and using an effective dust collection system according
to technical specifications and within technical limits of the machine.
HOLZMANN MASCHINEN GmbH assumes no responsibility or warranty for any other
use or use beyond this and for any resulting damage to property or injury.
12.1.1
Technical Restrictions
The machine is intended for use under the following ambient conditions:
Rel. Humidity:
Temperature (operational)
Temperature (Storage, Transport)
12.1.2
Prohibited Use / Forseeable Misuse
-
Operation of the machine without adequate physical and mental aptitude
-
Operating the machine without knowledge of the operating instructions
-
Changes in the design of the machine
-
Operating the machine in a potentially explosive environment (machine can generate igni-
tion sparks during operation)
-
Operation of the machine in closed rooms without chip and dust collection system (a nor-
mal household vacuum cleaner is not a suitable dust collection system device).
-
Operating the machine outside the limits specified in this manual
-
Remove the safety markings attached to the machine.
-
Modify, circumvent or disable the safety devices of the machine.
-
Cutting of materials with dimensions outside the limits specified in this manual
-
Use of tools which do not meet the safety requirements of the standard for machine tools
for woodworking (EN847-1).
The improper use or disregard of the versions and instructions described in this manual will result
in the voiding of all warranty and compensation claims against Holzmann Maschinen GmbH.
12.2
User Requirements
The physical and mental suitability as well as knowledge and understanding of the operating in-
structions are prerequisites for operating the machine. Persons who, because of their physical, sen-
sory or mental abilities or their inexperience or ignorance, are unable to operate the machinery
safely must not use it without the supervision or instruction by a responsible person.
Please note that local laws and regulations may stipulate the minimum age of the operator and
restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified electrician
or under the instruction and supervision of a qualified electrician.
12.3
Safety Devices
The machine is equipped with the following safety devices:
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
N O T E
max. 65 %
+5° C to +40° C
-20° C to +55° C
SAFETY
24
TKS500S_400V
Publicité
