Publicité
D
Ex Atmosphere: suitable for area in which explosive atmospheres due to dusts may form
Ex h
Type of protection offered by the non-electrical device
Ga
Equivalent level of device protection (EPL): Cat. 1G in Zone 0
Da
Equivalent level of device protection: Cat. 1D in Zone 20
IIC
Gas group IIC → Hydrogen (representative gas)
IIIC
Gas group IIIC Flammable volatile, non-conductive and conductive dust
T6
Class of surface temperature of devices for Group II gases: ≤ 85°C
T85°C
Maximum surface temperature of devices for Group II dusts = 85°C
Tamb -30 +60°C
Reference temperature for Atex environment
WARNING
POTENTIAL ELECTROSTATIC CHARGING HAZARDS –
All device components shall be cleaned only with wet clothes and antistatic products to not charge the exposed surfaces. See
par. 4.1 "Cleaning and disinfection").
Operators who use Atex SCBA are advised, at any stage of use, to wear antistatic clothing and use non-sparking tools.
Atex breathing apparatus must be worn and removed in the absence of an explosive atmosphere.
Always read this note and pay particular attention to par. 4.1 "Cleaning and disinfection".
See the Configurator for all combinations of mask + demand valve + cylinder that can be supplied with Atex marking.
10. TECHNICAL DATA
10.1. Technical data
Maximum operating pressure
Alarm activation pressure
Medium pressure
Operating pressure
10.2. Weights / Dimensions
RN/RN FR with mask and 6 l 300 bar steel cylinder (charge)
RN/RN FR with mask and 6.8 l 300 bar composite cylinder (charge)
RN/RN FR with mask and 9 l 300 bar composite cylinder (charge)
RN T1/RN FR T2 with mask and 6 l 300 bar steel cylinder (charge)
RN BIBO/RN FR BIBO with mask and 2 x 6.8 l 300 bar composite cylinders (charge)
RN BIBO/RN FR BIBO with mask and 2 x 9 l 300 bar composite cylinders (charge)
The weight is indicative, calculated with the TR 2002 BN model mask and BN dispenser.
The dimensions are the maximum overall dimensions (height x length x depth).
10.3. Materials
Back-plate
Belts
Reducer
Demand valve
Medium pressure hose
11. CODES FOR ORDERS, SPARE PARTS AND ACCESSORIES
11.1 Model codes
The codes reported here refer to the basic model, consisting of straps and reducer with medium pressure hose and gauge; the
basic model is equipped with quick connections between reducer-demand valve (Euro-Coupling type) and no accessories (i.e.
additional warning device). Contact the sales department to order the self-contained breathing apparatuses with other available
connections (Spasciani type) and any accessories.
11.2 Components / Spare parts
The components suggested by the Configurator must be combined to the self-contained breathing apparatus to complete the
order. Here are the codes of the components, which are also supplied as spare parts.
TR 2002 A CL2 mask
TR 2002 BN CL2 mask
TR 2002 A CL3 (S/M – M/L) mask
TR 2002 S A CL3 (S/M – M/L) mask
TR 2002 BN CL3 (S/M – M/L) mask
300 bar
55±5 bar
4.7 ÷ 6.2 bar
-30°C / +60°C
Description
Type 1: Thermo-formed polypropylene
Type 2: V0 Thermo-formed polypropylene
Type 1: Straps in self-extinguishing fibers
Type 2: Straps in aramid or para-aramid fibers
Chrome-plated brass
Nylon casing reinforced with glass fibers
For Type 1: NBR Rubber
For Type 2: PVC
Description
RN T1
RN
RN BIBO
RN FR
RN FR BIBO
RN FR T2
Description
– Read the user manual
ATTENTION!
158730000
158750000
1587100EC
15875FR00
15871FREC
15873FR00
113040000
113050000
1130000SM/1130000ML
1130600SM/1130600ML
1130100SM/113010SML
HxLxD Dimensions
Approx. weight
(mm)
310x660x220
310x660x225
310x660x230
310x660x220
310x660x225
310x660x230
Code
Code
Pag. 18 / 64
(Kg)
13,5
14,5
11
13
17
21
Publicité
