EN
USE
Please Note!
■
Ensure that there are no larger, sharp
objects on the surface which is to be
cleaned.
■
Do not use the nozzles (11, 14) to suck
up dust or dirt! If dirt were to get inside
the motor unit, this could damage the
motor.
■
For the suction function, the collecting
container with the filter needs to be
attached to the device. The filter must
not be damaged! If dirt were to get
inside the motor unit, this could damage
the motor.
■
Empty and clean the collecting container
after each use. Also clean the filter
regularly in order to prevent overloading
of the motor.
■
Switch the device off after each surface
has been cleaned as this will considerably
increase the operating time on each
battery charge.
1. Attach the accessory you want (see the
"Attaching / Detaching Accessories"
chapter).
L
To get more effective performance
from the blower, detach the collect-
ing container from the motor unit.
2. For the vacuum function: insert the
nozzle into the object to be emptied
before switching on.
3. To switch on the device, press the
On / Off switch
4. For the suction / blower function: guide
the nozzle over the area to be cleaned.
14
(10).
5. To switch off the device, press the On /
Off switch
again.
L
To ensure optimum suction perfor-
mance of the device, empty and
if necessary clean the collecting
container after every use (see the
"Cleaning and Storage" chapter).
CLEANING AND STORAGE
Please Note!
■
Do not use any sharp or abrasive cleaning
agents for cleaning. They may damage
the surfaces.
L
The filter may lose some of its colour
over time. This is normal and does
not have any adverse effect on
function.
1. Detach the nozzle.
2. Twist the collecting container (2) anti-
clockwise and detach it from the motor
unit (5) (Picture B1).
3. Remove the HEPA filter (3) (Picture B2).
4. Empty the collecting container over an
open dustbin.
5. Tap out the HEPA filter and clean it with
a soft brush if necessary. It can also
be rinsed out with clear water, but it
must be completely dry before it is
reinserted!
6. Wipe down the collecting container
if necessary using a soft dry cloth.
7. Remove hair and fluff from the used
accessory.
8. Store all parts in a cool, dry place which
is protected from direct sunlight and is
out of the reach of children and animals.