Publicité
EN
it from catching fire. Do not insert
anything into the ventilation openings
of the device and make sure that they
do not become clogged.
NOTICE – Risk of Damage to
Material and Property
■
Charge and store the device only in
closed rooms.
■
Use only original accessories from the
manufacturer in order to guarantee that
there is no interference that may prevent
the device from working and to avoid
possible damage.
■
Make sure that the charger cable is not
squashed, bent or laid over sharp edges
and does not come into contact with
hot surfaces.
■
Disconnect the device from the power
source if a fault occurs during charging
or before a thunderstorm.
■
Protect the device from: impacts, sub-
zero temperatures, temperature fluctua-
tions and persistent moisture.
ACCESSORIES
Upholstery Nozzle
The upholstery nozzle (17) is suitable,
for example, for upholstered furniture,
mattresses or car seats.
Crevice Nozzle
The crevice nozzle (16) is ideal for places
that are hard to get to, such as corners,
crevices or recesses.
Brush Attachment, Flat
The flat brush attachment (12) is suitable
for dusting delicate objects such as picture
frames, lamp shades, keyboards, books, etc.
The attachment is simply plugged directly
onto the crevice nozzle.
12
Blower Nozzles
The blower nozzles (14, 15) are suitable
for blowing out delicate objects such as
keyboards.
Brush Attachment, Round
The round brush attachment (13) can be
used to dislodge dirt to make it easier to
blow off the surface.
The attachment is plugged directly onto the
large blower nozzle.
Vacuum Nozzle
The vacuum nozzle (11) can be used to
empty objects / vacuum bags of air or fill
them with air.
ATTACHING / DETACHING
ACCESSORIES
Collecting Container
Attaching:
1. Place the HEPA filter (3) inside the
collecting container (2) and check that it
fits securely.
2. Place the collecting container on the
motor unit. When you do this, align the
locking lugs on the motor unit and the
recesses in the collecting container.
3. Twist the collecting container as far as
it will go clockwise.
Detaching: Twist the collecting container (2)
anticlockwise and detach it from the motor
unit (5) (Picture B1).
Suction Nozzles
Attaching: Slide one of the suction noz-
zles (16, 17) into the suction opening (1)
(Picture C).
Detaching: Pull the nozzle off the device.
Publicité
