Philips 9000 Serie Mode D'emploi page 5

Before first use
Assembling the After-Clean & Storage station
Assembling the Vacuum & Mop set-up
In order to use the AUTOCLEAN function or store and charge the appliance on
the After-Clean & Storage station, you need to first assemble the station by
clicking the appliance holder into the baseplate.
Tip: It is possible to slide the holder for Vacuum only set-up and put it back
upside down if you want to place the Vacuum only set-up on the other side of
the After-Clean & Storage station.
Note: Make sure that the After-Clean tray is placed in the baseplate and that
the temperature in the room where the appliance is stored, charged and cleaned
is between 5 °C and 35 °C.
Tip: You can hang the cleaning brush on the hook of the appliance holder.
1 To assemble the Vacuum & Mop set-up, insert the battery and attach the
3-in-1 handheld to the wet module ('click').
English
5