Philips 9000 Serie Mode D'emploi page 26

English
26
Clearing blockages from the wetting strips of the AquaSpin
nozzle
After long and frequent use of the appliance, the wetting strips of the AquaSpin
nozzle may become clogged at some point. Follow the steps below to clear the
blockage of the wetting strips of the AquaSpin nozzle.
1 Remove the wetting strip covers from the AquaSpin nozzle by moving them
sideways.
2 Remove the wetting strips from the AquaSpin nozzle by pulling them out
sideways.
3 Rinse the wetting strips under the tap.
4 Let the wetting strips dry before placing them back in the AquaSpin nozzle.