Philips 9000 Serie Mode D'emploi page 30

English
30
2
1
Cleaning the filter
Note: Always let the cyclone dry completely before placing it back into the
dust bucket.
4 Replace the cyclone (1) and turn it counterclockwise (2) to secure it back into
the dust bucket.
Caution: Make sure to fully tighten the cyclone when placing it back.
Rotate the cyclone until the cyclone cannot rotate any further and is fully
secured.
When the filter needs to be cleaned, the filter cleaning icon appears on the
screen.
1 Pull the filter case off the dust bucket.