Philips 9000 Serie Mode D'emploi page 38

English
38
Information code Cause
The air inlet openings are
blocked.
The wet filter in the dirty water
tank is blocked.
Unplug for use.
The wrong charger is
connected.
The battery is not inserted.
Solution
Check the air inlet openings for blockages
and remove them. If this does not solve the
problem, check the whole air passage for
blockages and remove them. For the
Vacuum only set-up, this refers to the
nozzle, tube, filter, vortex finder, long
crevice tool, and Mini turbo brush. For the
Vacuum & Mop set-up, this refers to the
nozzle, tube, and the wet filter.
Clean the mesh part of the wet filter with
the supplied cleaning brush.
Unplug the appliance for use. Otherwise, it
will not switch on. Only during AUTOCLEAN
is it possible to have the appliance plugged
in.
Only charge the appliance with the adapter
supplied. Only use 34V adapter
S036-1A340100HE. The corresponding
adapter number can be found on the
adapter.
Make sure that the battery is inserted (see
'Assembling the Vacuum & Mop set-up').