Publicité
WEIGHING
Use this application to determine the weight of items in the
selected unit of measure.
1.
In the upper left portion of the home screen, select
WEIGHING (this application is the default).
2. Press TARE or ZERO if necessary to begin.
3. Place objects on the pan to display the weight. When
stable, the * appears.
4. The resulting value is displayed in the main weighing
line in the active unit of measure.
EDIT SETTINGS
To view or adjust the current settings:
1. Touch the EDIT SETTINGS button. The settings screen
appears.
2. Minimum Weight: Establish a minimum weight value
to be used to verify a reading. If an actual weight
is below the established Minimum Weight value, it is
flagged by a color change: yellow.
3. To adjust the Minimum Weight value, touch the
MINIMUM WEIGHT button.
4. A numeric input window appears. Use the keys to enter
the desired Minimum Weight, then press √.
5. The display reverts to the previous screen with the new
Minimum Weight value highlighted in orange.
6. To return to the Weighing home screen, touch
RETURN TO APPLICATION at the bottom-right of
the screen.
PAGE 7 OF 106
OPERATION CONTINUED
PARTS COUNTING
Use this application to count samples of uniform weight.
Three different modes can be selected: Standard,
Check, or Fill Counting.
STANDARD PARTS COUNTING (DEFAULT)
1.
2. Place objects on the pan to display the number of
EDIT SETTINGS
To view or adjust the current settings, touch the EDIT
SETTINGS button. The settings screen appears:
• Settings available: APW, SAMPLE SIZE
• Functions available: RECALCULATE APW,
In the upper left portion of the home screen, select
PARTS COUNTING. The default (or last) average
piece weight (APW) is displayed.
pieces.
NOTE: Auto Optimization improves counting
accuracy. It recalculates the piece weight
automatically as parts are added. By default,
auto optimization is set to "off".
RETURN TO APPLICATION
0924 IH-4737
Publicité
