Publicité
REFERENCE WEIGHT ADJUSTMENT
(REFERENCE ADJUST)
The Reference Weight adjustment can be 1 to 1,000%.
Examples: 100% means the sample is displayed as
compared to 100% of the Reference Weight.
25% means the sample is displayed as
compared to 25% of the Reference Weight.
The Edit Settings screen shows current Reference Adjust
value. To change it, touch REFERENCE ADJUST button.
1. A numeric window appears. Key in the desired
Reference Weight Adjustment, then press √.
2. The display returns to the previous screen with the
new value highlighted momentarily. To return to the
Percent Weighing home screen, touch RETURN TO
APPLICATION.
CHECK WEIGHING
Check weighing is used to compare the weight of a
sample against target limits. Three different modes can be
selected: Over and Under, Nominal Weight Tolerance or
Nominal Percent Tolerance.
STANDARD CHECK WEIGHING (DEFAULT)
1.
In the upper left portion of the home screen, select
CHECK WEIGHING.
2. The default (or last) check weigh limits are displayed.
Place objects on the pan. The Under/Accept/Over
status is shown in the progress bar area, while the
actual weight of the item is shown on the main
display line.
PAGE 12 OF 106
OPERATION CONTINUED
EDIT SETTINGS
To view or adjust the current settings touch the
EDIT SETTINGS button. The Settings screen appears:
• Settings available: OVER LIMIT, UNDER LIMIT
• Functions available: RETURN TO APPLICATION
3. The check limit values are displayed in the settings
• To set the over limit value, touch the OVER LIMIT button.
• To set the under limit value, touch the UNDER LIMIT button.
4. A numeric input window appears. Enter the desired limit
5. The display returns to the previous screen with the new
screen.
weight, then press √.
value highlighted momentarily. To return to the check
weighing home screen, touch RETURN TO APPLICATION.
0924 IH-4737
Publicité
