Publicité
10. Weigh the sinker submerged in the test liquid. Follow
the screen instructions, then press ACCEPT to store
the sinker weight (submerged in liquid).
11. Once the necessary weights have been determined,
the density of the liquid sample is displayed in g/cm
(along with the weight in air, weight in water) on the
application screen.
12. Press BEGIN DENSITY DETERMINATION to reset all the
weight values and restart the process.
MEASURING THE DENSITY OF POROUS MATERIAL
USING OIL
1. To enable this feature, enter the density
determination setup menu, and set the following:
• Density type: Solid
• Liquid type: Water
• Porous material: ON
2. Confirm the default values displayed (water
temperature) are correct.
3. To edit the default values, touch EDIT SETTINGS.
The settings screen appears.
• Settings available: WATER TEMP, OIL DENSITY
• Functions available: RETURN TO APPLICATION
PAGE 24 OF 106
OPERATION CONTINUED
4. The balance calculates water density based on the
5. Measure the actual water temperature using a
6. To adjust the water temperature or oil density values,
7.
8. The display returns to the previous screen with the
9. To return to the density determination home screen,
10. Press BEGIN DENSITY CALCULATION.
11. Weigh the un-oiled sample in air. Follow the screen
3
12. Weigh the oiled sample in air. Follow the screen
water temperature value entered (look-up table).
precision thermometer.
touch the WATER TEMP or OIL DENSITY button.
Numeric input windows appear. Key in the desired
value, then press √.
new value highlighted.
touch RETURN TO APPLICATION.
instructions then press ACCEPT to store the dry
sample weight ("in air").
instructions then press ACCEPT to store the sample
weight (oiled).
0924 IH-4737
Publicité
