Publicité
13. Weigh the oiled sample submerged in liquid. Follow
the screen instructions then press ACCEPT to store
the oiled sample weight (submerged in liquid).
14. Once the necessary weights have been determined,
the density of the sample is displayed in g/cm
(along with the weight in air, un-oiled and oiled, and
weight in water) on the application screen.
15. The value stays on the display until BEGIN DENSITY
DETERMINATION is touched.
16. Press BEGIN DENSITY DETERMINATION to reset all
weight values and restart the process.
PEAK HOLD
The peak hold application allows the user to capture
and store the highest stable or unstable weight in a
series of weight measurements.
Three different start/reset modes can be selected:
• Manual (start and stop the capture via key press)
• Semi-Automatic (start automatically/reset manually)
• Automatic (start and stop the capture automatically)
This application allows both stable and unstable weights
to be captured.
PAGE 25 OF 106
OPERATION CONTINUED
PEAK HOLD – SEMI-AUTOMATIC (DEFAULT)
1.
2. Place item on the pan. The capture process starts
3
3. To release the reading, press END PEAK HOLD.
4. Clear the pan or press TARE to reset the display and
PEAK HOLD – MANUAL
1.
2. To enable this feature, enter the peak hold setup
In the upper left portion of the home screen, select
PEAK HOLD. Follow the screen instructions to begin.
automatically. The highest reading is held on the
display.
re-start the process.
For manual start and reset, choose manual mode.
menu and change the mode to manual.
0924 IH-4737
Publicité
