Publicité
3. The dynamic – automatic screen appears with the
default (or last) averaging time displayed. Place
objects on the pan to begin. The cycle starts
automatically.
4. After the cycle ends, remove the specimen. The
balance returns to the home screen automatically
(after a 10-second delay).
5. Press the RESET button to clear the reading and return
to zero.
PAGE 16 OF 106
OPERATION CONTINUED
FILLING
This application allows the user to slowly fill a container to
a pre-determined target weight. The progress bar displays
the filling status, and within 10 percent of the target value
the progress bar converts to fine resolution (+/– 10%) for
accurate results.
1.
2. The default (or last) target weight is displayed. Place
EDIT SETTINGS
To view or adjust the current settings, touch the EDIT
SETTINGS button. The settings screen appears:
• Settings available: TARGET WEIGHT
• Functions Available: RECALCULATE TARGET WEIGHT,
ESTABLISH A TARGET WEIGHT
Each time a new item is used for filling, the Target Weight
(fill-to-weight) must be established.
There are two methods to establish the Target Weight:
1.
2. The Target Weight can be derived from a sample.
In the upper left portion of the home screen, select
FILLING.
objects on the pan to begin. The progress bar
displays the filling status, and within 10 percent of
the target value, the progress bar converts to fine
resolution display.
RETURN TO APPLICATION
The actual Target Weight is known.
0924 IH-4737
Publicité
