Publicité
3. New items are added with default name and weight
information (no initial or final weights).
4. To change the default item name, press EDIT NAME.
The alpha-numeric entry screen appears.
5. Enter the new name, then press √. The display
returns to the previous screen with the new value
highlighted momentarily.
6. Continue adding items as required using ADD NEW.
New items can be added at any time.
7. To delete an item, touch the item to highlight it, then
press DELETE ITEM.
8. To clear the item initial weight press CLEAR INITIAL
WEIGHT. This feature is disabled if no initial weight is
stored.
9. To clear the item's final weight, press CLEAR FINAL
WEIGHT. This feature is disabled if no final weight is
stored.
10. To clear all items, press CLEAR ALL, then confirm.
11. When finished, press RETURN TO APPLICATION.
12. On the main Application screen, follow the screen
instructions. Add the first item, then press ACCEPT to
store the value.
13. The initial weights of the defined item are recorded
first, then the final weight so the items are collected
next.
14. Once the item's initial weight and the final weight
are stored, the values are displayed along with the
difference in weight and percent.
15. The items are stored in memory. To begin a new
Differential Weighing session, delete the initial
and/or final weights.
PAGE 21 OF 106
OPERATION CONTINUED
DIFFERENTIAL WEIGHING WITH AUTO-PROCESS ON
Differential weighing with auto process ON requires the
initial and final weights to be sequentially gathered for
a single item.
1. To enable this feature, touch the SETUP icon from the
2. Press AUTO PROCESS to turn it on.
3. Follow the screen instructions to begin.
4. Press ITEM SETTINGS to set up items in memory if
5. Follow the steps as shown on page 20.
6. A message prompts for Item 1 to be placed on the
7. A message prompts to start the process again, if
home screen to enter application setup.
necessary. Use the buttons as necessary.
Press RETURN TO APPLICATION when ready.
pan again, then to press ACCEPT to establish final
weight. After ACCEPT is pressed, the difference
between initial and final weights appears in the
Reference Fields.
desired.
0924 IH-4737
Publicité
