Publicité
TOTALIZATION – AUTOMATIC
The weight of the item is added automatically when
stable.
1. To enable this feature: Touch the SETUP icon
to enter application setup.
2. Press AUTO SAMPLE to turn this feature on.
3. Clear the pan if necessary. Add a new sample.
The item weight is shown on the main display line.
4. The weight of the item is automatically added, when
stable, to the total. The new total is shown on the
second display line.
5. Remove the item from the weighing pan, then add
the next item and continue the same as in manual
mode.
6. When finished, press the CLEAR TOTAL button to
reset the second display line to zero.
FORMULATION
Use this application for compounding and recipe
making. The number of components can be 2 to 99.
Formulation has two available modes of operation:
free formulation and recipe formulation.
PAGE 18 OF 106
OPERATION CONTINUED
FREE FORMULATION (DEFAULT)
This mode allows the user to freely add components. A
filler material is asked for at the end.
1.
2. To start the compounding process, press BEGIN
3. A prompt says place component 1 then press
4. A prompt says place item 2. Press ACCEPT. Continue
5. The total line shows the total weight of all the
6. Then press END FORMULA. The display may prompt
In the upper left portion of the home screen, select
FORMULATION.
FORMULATION.
ACCEPT. The item weight is displayed on the main
display line. Place the first ingredient on the pan (or
in a tared container). Press ACCEPT to store the first
component.
adding components and pressing ACCEPT to store
the weight of the individual components until the
formula is complete.
components. Press PRINT at any time in the process
to print the recipe.
for a filler material. If the formula calls for a filler
material, press OK.
0924 IH-4737
Publicité
