Uline Ohaus Explorer Mode D'emploi page 13

CHECK WEIGHING – NOMINAL/WEIGHT
TOLERANCE MODE
With this feature, you can establish a Target or Nominal
weight value and pre-set tolerance in weight.
1. To enable this feature, enter the setup menu.
2. Change the mode to Nominal, wt. Tolerance.
The Check Weighing options screen returns.
3. Press DONE to begin check weighing.
4. To use check weighing, touch EDIT SETTINGS to set
the nominal, and upper and lower tolerance values
(in weight).
5. Press RETURN TO APPLICATION when settings are
complete.
PAGE 13 OF 106
OPERATION CONTINUED
CHECK WEIGHING – NOMINAL/PERCENT
TOLERANCE MODE
With this feature you can establish a target or nominal
weight value and pre-set tolerance in percent.
1. To enable this feature, enter the setup menu.
2. Change the mode to Nominal, % Tolerance. The
3. To use this mode, touch EDIT SETTINGS to set the target
4. Press RETURN TO APPLICATION when settings are
Check Weighing options screen returns. Press DONE
to begin check weighing.
weight, and upper and lower tolerance values.
complete.
0924 IH-4737