PERCENT WEIGHING
Use percent weighing to measure the weight of a sample
displayed as a percentage of a pre-established reference
weight.
1. The default (or last) reference weight is displayed.
Place an object on the pan. The difference
between the sample and the reference weight is
displayed as both a weight and a percentage.
2. To access percent weighing press the upper left
portion of the home screen, so the available
application modes are visible.
3. Select PERCENT WEIGHING. The percent weighing
home screen appears.
EDIT SETTINGS
To view or adjust the current settings, touch the
EDIT SETTINGS button. The settings screen appears:
• Settings available: REFERENCE WEIGHT,
• Functions available: RECALCULATE REFERENCE,
PAGE 11 OF 106
OPERATION CONTINUED
REFERENCE ADJUST
RETURN TO APPLICATION
ESTABLISHING A REFERENCE WEIGHT
There are two methods to establish the Reference Weight
value:
• Direct: If the actual Reference Weight is known, it can
be entered directly.
• Derived: The sample's weight can be used to establish
the reference weight.
ESTABLISHING A KNOWN REFERENCE WEIGHT
1.
The current Reference Weight value is shown on the
Settings screen. To adjust the Reference Weight directly,
touch the REFERENCE button. A numeric input window
appears.
2. Key in the desired Reference Weight, then press √. The
display returns to the previous screen with the new
value highlighted.
3. To return to the Percent Weighing home screen, touch
RETURN TO APPLICATION.
USING A SAMPLE TO ESTABLISH A DERIVED
REFERENCE WEIGHT
1.
To establish a new Reference Weight value, touch the
RECALCULATE REFERENCE button.
2. The New Reference screen appears. Follow the screen
instructions to establish a new Reference Weight.
Actions available: TARE, CANCEL or ACCEPT.
3. Press ACCEPT to capture the value and return to the
Settings screen.
4. The display returns to the Settings screen with the new
Reference weight value highlighted momentarily.
5. To return to the Percent weighting home screen, touch
RETURN TO APPLICATION.
0924 IH-4737