Publicité
11. Continue adding components as required for your
formula.
12. To change the order of a component in the formula,
touch the item to highlight it, then press MOVE UP or
MOVE DOWN.
13. To delete a component, touch the item to highlight it,
and press DELETE ITEM.
14. To clear all components, press CLEAR ALL. A
confirmation is required.
15. When finished, press RETURN TO APPLICATION.
16. Press BEGIN FORMULATION. Follow the screen
instructions: Add the required component in the
formula.
17. The component weight is shown on the main display
line. The progress bar displays the fill status. Within
10% of the target value the progress bar converts to
fine resolution display.
18. Press ACCEPT to add the weight of the component
to the total. The new total appears on the second
display line.
19. The difference to the target is displayed for each
component (in weight and percent). Follow the
screen instructions to continue adding components
and pressing ACCEPT to complete the formula.
20. When finished, the formulation results screen is
displayed.
PAGE 20 OF 106
OPERATION CONTINUED
FORMULATION RESULTS
1.
2. To close the results window and return to the
DIFFERENTIAL WEIGHING
Differential weighing stores weight values so samples
can be dried or processed and the difference in weight
calculated. Up to 99 samples can be stored.
Differential weighing has two operating modes:
• Auto-Process ON, where the initial and final weights
• Auto-Process OFF, where initial and final weights are
Touch the SETUP icon to enter application setup from the
home screen.
ITEM SETTINGS
1.
2. To set up the item, press ADD NEW.
Press PRINT to send the results to the enabled COM
part.
Application home screen, press CLOSE.
are sequentially gathered for a set of items, with no
need to return to item settings.
gathered separately for each item, after each item
is selected in item settings.
Press ITEM SETTINGS to set up items in memory.
0924 IH-4737
Publicité
