Publicité
Welding wire coil:
- The size of the welding wire used is dependant on the job. Welding rods from 0.6 - 0.9
mm can be used with this machine.
- The wire feed roller, nozzle and welding rod diameter must all be suited to each other.
- The welder is designed for use with a wire reel up to 1 kg.
Open the housing cover (13) by turning the
lock (14) clockwise and pulling the housing
upwards.
Turn the roll holder (A) anti-clockwise through
90° and remove it from the shaft.
A
91
13
14
Publicité
