Publicité
Place the transparent protective lens (P) and
the dark filter lens (O) into the plastic frame
Q
(Q) by lying the plastic fram (Q) on a flat
surface, inserting the dark lens (O) with the text
facing upwards and finally the transparent
lens (P).
O
Insert the plastic frame containing the
transparent protective glass and the dark filter
glass into the space provided. Ensure the
P
text on the dark lens is readable from the
front of the face shield. Secure it in place by
rotating the fixing tabs (N) 180° so that the
fixture is held in place by the semi-circular side
N
of the fixing tabs.
Place the handle (R) into the space provided
on the back panel of the face shield and insert
T
the screws (S) through the holes in the front
of the face shield. Subsequently fix the handle
R
in place with the nuts (T) provided.
S
Finally, fold the face shield as illustrated and
ensure that the plastic pins fit tightly into the
holes provided.
90
Publicité
