Publicité
not be modified. The manufacturer can accept no responsibility for damage or injury caused
by modifications to the machine.
This product is designed for DIY and domestic use only and is not suitable for commercial,
industrial or heavy duty use.
Any other use of the product is expressly forbidden and counts is misuse.
Residual risk
Even through correct use of the welder, residual risks cannot be ruled out.
Due to the nature of the machine, following dangers may arise:
• Eye injury through exposure to the arc
• Burns from coming into contact with hot parts of the machine.
• Danger of accidents or burns from flying sparks or molten metal
• Unhealthy emissions of smoke or gas in poorly ventilated or small rooms.
ASSEMBLY
SCOPE OF USE
Face shield:
Insert the plastic lens retaining pins (M) into
the holes in the front of the face shield and
slide the fixing tabs (N) over the pin (M) at the
rear of the face shield. Turn the fixing tabs (N)
until the flat side lies on the inside of the lens.
N
M
89
Publicité
