Publicité
е)
Chapter 2: Let's Plug In & Play
[2] Playing
гак
ҮАМАНА = >< S505"
Ocom
Omer
Ока
Омор
OREV
GA)
DEC
2
——
CURSOR -—
POWER
PLAY
О EDIT
STORE
OUTILITY OBYPASS
Ro en
1 Turning On the Power
Turn on the equipment in your system sequentially, starting from the transmission devices. For
example, if the system is: FX550 — Power amplifier Speakers, turn on the FX550 then the
Power amplifier.
After a few seconds, something similar to the display shown below will appear.
Program Number
Effect Program Title
Amp Simulator setting
REV section effect
MOD & REV Configuration
MOD section effect
Bypass Indicator
2 Setting the Input Level
Adjust the input level using the INPUT level control.
Strum your guitar strongly and adjust the level so that the SIGNAL indicator lights, but the
PEAK indicator is barely lit.
3 Selecting and Playing Effect Programs
Use the [ W ] and [ A ] buttons to select the effect programs.
As each effect program is selected, the LCD will display the effect program number and title, the
type and configuration of MOD and REV section effects used, and the amp simulator setting.
вз Effect programs can also be selected using a foot switch or MIDI foot controller. This is con-
venient in a session or on the stage. For details, see "Foot switch Control" on page 28 and
"MIDI Control" on | page 32.
Publicité
