Publicité
Delay — DLY
Tempo Delay — TDL
| |
Right Channel
DLYR
Delay Time
0.1 - 1200 msec
_ Chapter 4: Effect parameters
A straightforward delay effect providing independent delays up to 1200 msec for the left and
right outputs.
ime
E
Feedback Level
0 - 100%
Med
p es
signal that is fed
If the DLYL and DLYR parameters are set to
the same (or similar) delay times, this effect
may sound like a signal phasing problem. If
so, adjust the L/R parameter to correct it.
L/R
L/R Balance
150 ~ L-R ~ R50
0 = dry signal.
50 = 50% delay 50% dry signal.
0 - 100%
100 = 100% delay.
co, --30 dB - +6 dB
Sets the output level of the effect.
MIX
Mixing Balance
Output Level
The delay time of tempo delay effect can be synchronized to the song tempo. This can be set
manually in bpm (beats per minute), from a MIDI sequencer or drum machine using MIDI clock
messages, or by tapping a foot switch.
TAP
See page 29.
*
*
МОТЕ
CS
A J3, D, 13, N J The number of beats per song measure.
The amount of effected signal that is fed
E
Feedback Level
0 - 100%
back into the effect:
om
0 = Same delay time for L&R.
Tempo Trigger Type
10 « Slightly differing delay times for L&R,
which produces a stereo type effect.
If the DLYL and DLYR parameters are set to
the same (or similar) delay times, this effect
may sound like a signal phasing problem. If
so, adjust the L/R parameter to correct it.
0 = dry signal.
50 = 50% tempo delay 50% dry signal.
100 = 100% tempo delay.
Sets the output level of the effect.
27
Publicité
