Publicité
Bypass
Chapter 5: Remote Control
You can select which effect sections are bypassed using the foot switch.
@ Set Up Procedure
1. Press the [
] or [ A ] button to select the program to be controlled.
` 2. Press the [EDIT] button to show the FOOT ON/OFF display.
3-1. To bypass all effect sections:
Press the [ «4 | or [ >» | button to position the cursor, and select "BYPASS : Used" using
the
[W]or[A ] button.
3-2. To set individual effect sections for bypass:
(D Press the [ «4 | or [ > | button to position the cursor, and select "BYPASS : Unused"
using the [ W ] ог [ À ] button.
(2) Press the [<q ] ог [ >» | button to position the cursor, and use the [ V ] or [ А | button
to select COMP.
|
© Press the [ 44 ] or [ >» ] button to position the cursor, and use the [ V ] or [ А | button
to select *Used" if you wish to be able to bypass the COMP section using the foot
` switch, or "Unused" if you do not.
(4) Repeat the above steps (2) and (3) for each effect section: DIST, EQ, MOD and REV.
4. Store the settings and switch to Play mode.
€ Operation Procedure
1. Connect the foot switch to the BYPASS jack on the rear panel.
31
Publicité
