Publicité
o
SIGNAL
РЕАК
YAMAHA E ÈS SOS"
Ocom
ODIST
О ва
Омор
One
LL
С5@
COCOCO
[1] Editing an Effect Program
1. Use the [ V ] and [ A ] buttons to select the effect program.
2. Press the [EDIT] button to enter Edit mode.
À display similar to the following will be shown.
Amp Simulator
REV section effect
MOD & REV Configuration
Cursor
MOD section effect
3. Edit Step 1
(D Use the [<q ] and [ P> ] buttons to select the parameter that you want to edit: MOD section
effect, REV section effect, MOD & REV Configuration, and Amp Simulator.
These parameters are explained on the next page.
(2) Use the [ W ] and [ A ] buttons to adjust the parameter.
sz» What is a parameter?
A parameter is a variable element such as a numeric value. For example, "delay time" and
"modulation speed" are variable numeric parameters. Amp Simulator is a variable parame-
ter, too.
(3) Follow the same procedure to edit the other parameters.
10
Publicité
