Publicité
Chapter 5: Remote Control
9. Press the [EDIT] button to show the CTRL display shown above.
Max.
Min.
10. Press the [ W ] or [ À ] button to show the parameter that is to be controlled.
11. Press the [<q ] or [ p> | button to position the cursor, and use ће [ V ] and [ А ] buttons to
set the min and max control range.
The min and max values are expressed as a percentage (%) of the РТИ
ЕА range. For
example, the variable range of the Distortion effect's TON parameter is —30 to +30. If the
min and max values are set to 20 (%) and 60 (96) respectively, as shown below, the control
range will be –18 to +6.
12. Press the [EDIT] button to show the CTRL2 display, and repeat steps 10 and 11 to set up the
2nd MIDI Controller.
13. Store the settings and switch to Play mode.
e Operation Procedure
1. Connect the MIDI output of the device det? is sending the MIDI Controller to the FX550's
MIDI IN connector.
i
1
|
{
i
i
ј
i :
2. Transmit the corresponding MIDI Controller to the FX550.
36
Publicité
