Publicité
Chapter 3: Editing, storing, and titling an effect program
[2] Storing an Edited Effect Program
|
Edited effect programs will not be lost when the FX550 is switched off, so for future use you
may want to store them. Follow the procedure below.
1. Press the [STORE] button.
The following display will appear on the LCD, and the program number will flash.
If you edited a preset effect program (1-50), program number "51" will appear.
. Use the [У ] and [ A ] buttons to select the destination user program memory where you
want to store the edited effect program, program memory numbers 1-50. The preset program
numbers, cannot be selected.
Note: The effect program already stored at the selected destination will be overwritten when
the [STORE] button is pressed in the next step.
. Press the [STORE] button to store the program.
While the program is being stored, the following display will be shown.
When the store operation is complete, the previous display will appear with the new program
number.
|
ts Copying an effect program
Effect programs can be copied to other effect program memory locations. This is useful, for
example, when you want to sort your user effect programs into the order that you will use
them during a live performance.
13
Publicité
