Application And Operation M Egaview20; Contents Of The Packing - Marmitek M EGAVIEW20 Guide Utilisateur

TV channel on your antenna cable. Then you can w atch this signal as a kind
of internal TV-channel everyw here in your home assumed there is an
antenna connection.
The M armitek products are manufactured w ith the utmost precision and are
of high quality. Please read this manual first and follow the instructions so
you can enjoy the possibilities of this product optimally.

1. APPLICATION AND OPERATION M EGAVIEW20

The antenna cable is, as you could say, looped into the modulator. The
incoming antenna signal is connected to the antenna connection, besides
that you can connect an A/V device of your choice to the input on the
M egaView 20. The outgoing antenna signal then carries both the standard
antenna signal and the added Audio/Video-signal (of for instance a DVD-
after
player or AV-camera). On every TV connected to this antenna system
the modulator
('To TV / RF OUT' of your M egaView 20) the added
Audio/Video-signal can be w atched on the selected channel. You do not
need to make any changes to the rest of your antenna netw ork.
The modulator itself has no influence on the strength of the signal. The
maximum length of the cables to be used is determined by the present
cable netw ork in your home. If you w ant to connect multiple TV sets or
w ant to use a longer cable, w e advice you to use an amplifier/splitter. Your
antenna material supplier can advice you in this.

2. CONTENTS OF THE PACKING

Check after unpacking if the follow ing parts and accessories are present:
4 © M ARM ITEK