Frequently Asked Questions; Technical Data - Marmitek M EGAVIEW20 Guide Utilisateur

Tip: see for all possibilities w w w.marmitek.com

7. FREQUENTLY ASKED QUESTIONS

No im age, no sound
• Check if all cables are connected properly.
• Check if the channel is set correctly.
The M egaView 20 pict ure is int erf ered and all t he ot her
channels are o.k.
There might be a TV channel too close to the selected M egaView 20
channel. Choose another channel for the M egaView 20 (preferably the
middle one of three or if possible five free channels).
Int erf erence w it h t he ot her channels
Choose another channel, preferably the middle of three free channels in the
band.
Dist ort ed sound
Turn dow n the volume of the connected device.
Do you have any questions that are not answ ered here? Then check
w w w.marmitek.com.

8. TECHNICAL DATA

M ONO RF M odulator
Pow er:
Standard:
M odulation frequency range: UHF: 471.25~855.25M Hz channel 21-69
Input:
Output level:
Insertion loss:
Carrier w ave audio:
M odulation method:
Size:
M EGAVIEW20
230VAC/50Hz, DC 9V/200mA
P AL B/G
Video, Audio L+R (SCART, RCA)
72 dBµV +/- 3dB in 75 Ohm
< 1,5dB at 860M Hz
5.5M Hz
Double side band modulation
120 x 84 x 33mm
9