Publicité
CHARGE DEEBOT
1
Press and hold
for 3 s, wait for the startup music to play, indicating that
the robot has powered on.
3 s
2
Tap
to recall the robot to enter the Station to charge.
6.5 h
Short press
• Once the Station is placed properly and plugged in, the robot will automatically
return to it to recharge and empty the Dust Bin as needed during operation. To
ensure this process runs smoothly, it is recommended that the robot starts from
the Station and that the Station is not moved while cleaning.
EN
16
OPERATE DEEBOT
When creating a map for the first time, please follow the robot to help resolve
some minor issues.
For instance, if the robot gets stuck under low furniture, you can refer to the
following solutions:
1. Raise the furniture if feasible.
2. Cover the bottom of the furniture to prevent the robot from entering.
3. Set up virtual boundaries in the App to prevent the robot from entering.
1
Start Cleaning
Before cleaning for the first time, please make sure the robot is in the
Station and fully charged. Tap
start cleaning and mapping simultaneously.
2
Pause
When the robot is working, tap
3
Wake up
After pausing for a while, all indicator lights on the robot will go out. To
wake the robot up, tap
on it.
Short press
Note:
1. Do not frequently remove the washable mopping pads.
2. Do not use a rag or any other object to scratch the Moping Pad Plates.
3. When the ECOVACS HOME App prompts that the mopping pads need to be
replaced, please replace them in time. Explore more accessories
in the ECOVACS HOME App or at
on the robot, and then the robot will
on it to pause its activity.
https://www.ecovacs.com.
Publicité
